Digimerge DH200 Instruções de Operação descarregar pdf (Página 46)

36

Using the Main Menu

UPDATE

Use the Update menu to upgrade system

firmware.

NOTE: The system supports most major

brands of USB flash drives with a capacity

of 10 MB ~ 16 GB.

To upgrade firmware:

1. Download the latest firmware update from

the Digimer

ge website.

2. Copy the firmware to a blank USB flash

driv

e.

NOTE: Do not have any folders on the USB

flash drive—just the firmware file.

3. Connect the USB flash drive to the USB

port

on the front panel.

4. Stop all recording on the system.

NOTE: You must stop all recording in order

to perform the upgrade.

5. Open the Main Menu and select

SYSTEM.

6. Under the UPDATE tab, select

UPDATE.

7. Select

START and press the ENTER button.

Firmware upgrade begins.

Do not

remove

the USH flash drive until the upgrade

process is complete.

Do not

press any

buttons or power off the system during the

upgrade process.

When upgrade is finished, press the ENTER button

in the prompt window to restart the system.

INFO

View important system information:

• LANGUAGE: The current system language

• S/W VERSION: The current system

firmware version

• DOMAIN NAME: Your Digimerge DDNS

domain name

• MAC: The physical address of the DVR on

your network

• NETWORK: The IP address of the system

• INTERNAL HDD: 1 HDD, size and space

remaining

• USB (FRONT): The status of the USB port

on the front panel

• USB (REAR):

• 4 Channel models: The status of the USB

mouse port. Note that on the 4 channel

models, the rear USB port is only used

for mouse connectivity.

• 8/16 Channel models: The status of the

USB port.

• IDE BUS: The status of the HDD—will show

"GOOD" or "ERROR"

Figure 19.3 Update menu

Figure 19.4 System Info menu

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 163 164

Comentários a estes Manuais

Sem comentários